Motors & Power Transmission

Timing Belt, Belt Material Ethylene Elastomer, Belt Series PowerGrip(R) GT(R)4, Industry Number 3850-14MGT-115, Number of Teeth 275, Pitch 14 mm, P...

Top Width 0.88 in Thickness 0.53 in Outside Length 194 in V-Belt Type Banded Belt Series Hi-Power II PowerBand V-Belt Section C Indus...

Shaft Collar LH Thread,1.13 In.x12,303 SS Screw Size 1/4"-28 Width Tolerance +0.003 in / -0.010 in Bore Diameter 1 1/8 in-12 Collar Width 1/...

Timing Belt, Belt Material Neoprene, Belt Series PowerGrip(R), Industry Number 270L050, Number of Teeth 72, Pitch 0.375 in, Pitch Length 27 in, Too...

Wear Sleeve, For Shaft Size 88.82 to 88.98 mm, Material Stainless Steel, Flange Diameter 97.64 mm, Overall Width 20.65 mm, Wall Thickness 0.28 mm, ...

Motor Dual Run Capacitor, Dual Run Capacitor, Round, 440/370V AC, Microfarad Rating 45/5 MFD, Overall Height 4 1/4 in, Case Material Aluminum Over...

Quick detachable bushings are used in high-power applications to strengthen the mounting of the pulley or sprocket onto the drive shaft and must be...

Pillow Block Bearing, Base Height 0.59 in, Base Width 1.456 in, Bearing Insert Material Alloy Steel, Bearing Insert Type Radial Ball, Bore Diameter...

Single Phase, Motor Design Permanent Split Capacitor, 1/2 hp HP, Nameplate RPM 1,730 RPM, No. of Speeds 2, Voltage 120V AC, Full Load Amps 5.5 A, 4...

The FASCO - D1124 is an OEM Replacement Motor, specifically designed to replace the original motor in a machine or system. This replacement motor e...

These single-phase belt-drive HVAC motors are designed to be held in a cradle-base mount with vibration-reducing rings on each end. Also called res...

The BALDOR-RELIANCE - EM3611T is a 3-phase AC General Purpose Motor, designed for industrial and commercial use. This motor converts electrical ene...

Wedge V-Belt, Belt Material Polybutadiene, Edge Construction Wrapped, Industry Number 3V400, Number of Bands 1, Outside Length 40 in, Reinforcing C...

Here is the revised description: The MARATHON MOTORS - 184TTDBD6026 is a General Purpose Motor, classified under the category of 3-Phase AC Motors....

Outside Dia. (In.) 4-5/16 Bearing Width (In.) 0.5938 Country of Origin Japan

Sleeve Coupling Insert, Coupling Size 10, Maximum Speed 3,600 RPM, Maximum Torque 3,735 in-lb, Outside Diameter 7 1/16 in, Insert Construction - Ne...

Timing Belt, Belt Material Neoprene, Belt Series PowerGrip(R) Timing Belts, Industry Number 390L100, Number of Teeth 104, Pitch 0.375 in, Pitch Len...

Bushed L-section timing belt pulleys have a medium 0.375 in. pitch. The "L" designation indicates they are compatible with "light" trapezoidal timi...

Radial Ball Bearing, Bearing Industry Number 6207, Bore Diameter 35 mm, Closure Double Sealed, Outer Ring Width 17 mm, Outside Diameter 72 mm, Ring...

Timing Belt, Belt Material Neoprene, Belt Series PowerGrip(R), Industry Number 560XH200, Number of Teeth 64, Pitch 0.875 in, Pitch Length 56 in, To...

Radial Ball Bearing, Bearing Industry Number 6015, Bore Diameter 75 mm, Closure Double Sealed, Outer Ring Width 20 mm, Outside Diameter 115 mm, Rin...

Tapered Roller Bearing Cone, Bearing Industry Number L814749, Bore Diameter 3 in, Bore Type Tapered, Cage Material Chrome Steel, Compatible Cup Man...

Radial Ball Bearing, Bearing Industry Number 6208, Bore Diameter 40 mm, Closure Double Sealed, Outer Ring Width 18 mm, Outside Diameter 80 mm, Ring...

Timing Belt Pulley, For Belt Series L, For Belt Width 1/2 in, For Bushing Size G, For Bushing Type Split Taper, For Use With Timing Belt, Material ...