Dake Corporation 977600-1V Floor Drill Press, Belt Drive, Variable Speed, 46 RPM – 3,550 RPM, 18 in Swing
Original price
$4,841.50
-
Original price
$4,841.50
Original price
$4,841.50
$4,841.50
-
$4,841.50
Current price
$4,841.50
Floor Drill Press, Primary Material Application Metal, Wood, Power Down Feed Included No, Drill Press Type Floor Stand, Drill Press Application Drilling, Tapping, Speed Control Variable, Speed Adjustment Knob, Swing 18 in, Spindle-to-Column Distance 9 in, Horsepower 2 hp, Voltage 120V AC, Spindle Taper 3MT, Number of Speeds Variable, Chuck Size 5/8 in, Chuck Style Keyed, Guard Included Yes, Coolant System No, Quill Diameter 2 1/2 in, Drilling Capacity in Steel 1 in
| Chuck Size | 5/8 in |
|---|---|
| Base Size | 15 in x 23-5/8 in |
| Overall Depth | 23 5/8 in |
| Quill Dia. | 2 1/2 in |
| Overall Width | 15 in |
| Overall Height | 71 in |
| Column Dia. | 4 in |
| Table Slot Size | 5/8 in |
| Table Width | 13 3/4 in |
| Base Height | 23 5/8 in |
| Table Length | 13 3/4 in |
| Maximum Overall Height | 71 in |
| Base Width | 15 in |
| Column Diameter | 3 5/8 in |
| Maximum Spindle-to-Table Height | 28 3/8 in |
| Maximum Spindle-to-Base Height | 50 in |
| Quill Diameter | 2 1/2 in |
| Drill Press Product Grouping | General Purpose Drill Presses |
| Drive Type | Belt |
| Swing | 18 in |
| Voltage | 120V AC |
| Motor HP | 2 hp |
| Number of Speeds | Variable |
| Capacity Steel | 1 in |
| Spindle Speed | 36 to 3550 rpm |
| Capacity Cast Iron | Not Specified |
| Max. Spindle To Base | 49 1/4 in |
| Amps AC | 20 A |
| Includes | 5/8 in Keyed Chuck, Drift for Bit Removal, HDPE Chip and Chuck Guard |
| Spindle Taper | 3MT |
| Corded/Banded | Corded |
| Spindle Travel | 5 in |
| Corded/Cordless | Corded |
| Spindle to Table | 28 3/8 in |
| Phase | Single-Phase |
| Power Down Feed Included | No |
| Number of T-Slots | 2 |
| Tilting Angle | 180 Degrees |
| Table Work Surface | 13-3/4 in x 13-3/4 in |
| Drilling Capacity Wood | Not Specified |
| Hz | 60 Hz |
| Application | General Purpose Drill Press |
| Tool Weight | 397 lb |
| Speed Control | Variable |
| Table Slot | Yes |
| Chuck Style | Keyed |
| Chuck Capacity | 5/8 in |
| Standards | CE Certified |
| Speed Range | 46 to 3,550 RPM |
| Maximum Spindle Speed | 3,550 RPM |
| Primary Material Application | Metal, Wood |
| Current | 20 A |
| Drill Press Application | Drilling, Tapping |
| Drilling Capacity in Wood | 1 in |
| Radial Arm | No |
| Speed Adjustment | Knob |
| Power Source | Corded |
| Coolant System | No |
| Number of Pieces | 4 |
| Drilling Capacity in Steel | 1 in |
| Drill Press Type | Floor Stand |
| Tapping Compatible | Yes |
| Horsepower | 2 hp |
| Minimum Spindle Speed | 46 RPM |
| Number of Spindle Speeds | Variable |
| Table Shape | Square |
| Guard Included | Yes |
| Spindle-to-Column Distance | 9 in |
| Country of Origin | Taiwan (subject to change) |