Liberty Pumps HT41M-2 Submersible Sump Pump, 2/5 hp, 115V AC, 65 gpm Flow Rate @ 10' of Head, 1 1/2 in FNPT
Original price
$564.29
-
Original price
$564.29
Original price
$564.29
$564.29
-
$564.29
Current price
$564.29
Submersible Sump Pump, HP 4/10, Phase - Pumps 1, Rated Voltage 115V AC, Hz 60 Hz, Amps 12 A, Switch Actuation No Switch Included, Switch Electrical Connection No Switch Included, Body Material Cast Iron, Impeller Material Engineered Polymer, Shaft Seal Material - Pumps Carbon, Ceramic, Flow Rate @ 5 Ft. of Head 59.0 gpm, Flow Rate @ 10 Ft. of Head 51 gpm, Flow Rate @ 15 Ft. of Head 31.0 gpm, Max. Head 20 ft, Min. Sump Pit Dia. 14 in, Minimum Water Depth 14 in, Overall Height 11 1/2 in
| Cord Length | 25 ft |
| Length | 9" |
| Height | 11-13/32" |
| Manufacturers Warranty Length | 3 yr |
| Width | 7-3/4" |
| Cord Length - Pumps | 25 ft. |
| Min. Sump Pit Dia. | 14 in |
| Max. Diameter Solids | 3/4 in |
| Discharge Dia. | 1 1/2 in |
| Width at Widest Point | 7 3/4 in |
| Overall Height | 11 1/2 in |
| Minimum Water Depth | 14 in |
| Sump Pit Diameter - Minimum | 14 in |
| Solids Diameter - Maximum | 3/4 in |
| Discharge Diameter | 1 1/2 in |
| Body Diameter | 9 in |
| Discharge NPT | 1-1/2" F |
| HP | 4/10 |
| Hz | 60 Hz |
| Impeller Material | Engineered Polymer |
| Max. Head | 20 ft |
| Motor RPM | 1550 |
| Motor Type | Shaded pole |
| Voltage | 115V |
| Phase | Single |
| Pump HP | 4/10 |
| Thermal Protection | Yes |
| Alarm Included | No |
| Item - Sump Pumps | High-Temperature Submersible Sump Pump |
| GPM of Water @ 15 Ft. of Head | 31 |
| High Temp. Rated Impeller | Yes |
| Max. Head - Pumps | 20 ft. |
| Amps - Pumps | 12.00 |
| Impeller Material - Pumps | Engineered Polymer |
| High Temp. Rated Power Cord | Yes |
| NEC Cord Designation | SJEOOW |
| Input Phase AC | 1 |
| Mechanical Seal | Buna-N, CRB/CMC, Stainless Steel |
| GPM of Water @ 10 Ft. of Head | 51 |
| GPM of Water @ 5 Ft. of Head | 58 |
| Pump RPM | 1550 |
| Gauge/Conductor | 16/3 |
| Handle | Yes |
| Voltage - Pumps | 115VAC |
| Max. Liquid Temp. | 200 Degrees F |
| Outlet | 1-1/2" FNPT |
| Bearing Type | Ball |
| High Temp. Rated Switch | No |
| Base Material | Cast Iron |
| Switch Type - Pumps | Manual |
| High Temp. Rated Thermal Overload | Yes |
| Duty | Continuous |
| Pump Body Material | Cast Iron |
| Shaft Seal Material - Pumps | Carbon, Ceramic |
| Amps | 12 A |
| Application | Dewatering |
| Discharge | 1-1/2 in FNPT |
| Flow Rate @ 15 Ft. of Head | 31.0 gpm |
| Discharge Standard | NPT |
| RPM | 1,550 RPM |
| Discharge Gender | Female |
| Rated Voltage | 115V AC |
| Phase - Pumps | 1 |
| Flow Rate @ 10 Ft. of Head | 51 gpm |
| Switch Actuation | No Switch Included |
| Duty Cycle | Continuous |
| Switch Electrical Connection | No Switch Included |
| Flow Rate @ 5 Ft. of Head | 59.0 gpm |
| Body Material | Cast Iron |
| Frequency | 60 Hz |
| Horsepower | 2/5 hp |
| Motor Housing Material | Cast Iron |
| Rotation Speed - Maximum | 1,550 RPM |
| Installation | Submersible |
| Flow Rate @ 10 ft of Head | 65 gpm |
| Includes Alarm | No Alarm Included |
| Shaft Seal Material | Carbon/Ceramic |
| Series | HT40-Series |
| For Industry | Residential |
| Operation | Manual |
| Feet of Head - Maximum | 19 ft |
| Hazardous Location Class | Not Rated |
| Current | 13 A |
| Power Source | Corded Electric |
| Liquid Temperature - Maximum | 200 Degrees F |
| Impeller Design | Vortex |
| Flow Rate @ 30 ft of Head | 0 gpm |
| For Media Type | Clear Water |
| Country of Origin | United States |