Liquidynamics Inc. 21094-S32 Air Drum Pump, Cart, 5:1, 4 gpm Max. Flow Rate, 14,000 cps Max. Viscosity
Original price
$4,493.77
-
Original price
$4,493.77
Original price
$4,493.77
$4,493.77
-
$4,493.77
Current price
$4,493.77
Air Drum Pump, Max. Air Pressure 120 psi, Spout Connection Size 1/2 in, Suction Tube Material Steel, Self-Priming Yes, Overall Length 46 1/2 in, Explosion Proof No, Discharge Connection Type FNPT, Features Low Noise, Spout Length 8 in, Food Grade No, Air Outlet Size 1 in, Bung Connection Dia. 2 in, Air Consumption 12 cfm, Hose Length 300 in, Variable Speed No, Includes Discharge Hose Yes, Noise Level 90 dB, Max. Viscosity 14,000 cps
| For Container Size | 55 gal |
|---|---|
| Hose Length | 300 in |
| Inlet Size | 1" |
| Manufacturers Warranty Length | 3 yr. |
| Discharge Size FPT (In.) | 1/2" |
| Air Inlet Size | 1/4 in FNPT |
| Suction Tube Length | 39 in |
| Adapter Dia. | 2" |
| Overall Length | 46 1/2 in |
| Air Outlet Size | 1 in |
| Hose Outside Dia. | 3/4 in |
| Spout Connection Size | 1/2 in |
| Spout Length | 8 in |
| Height Above Container | 11 1/4 in |
| Bung Connection Dia. | 2 in |
| Overall Height | 38 in |
| Overall Diameter | 2 in |
| Hose Inside Diameter | 1/2 in |
| Hose Outside Diameter | 3/4 in |
| Adapter Connection Diameter | 2 in |
| Air Inlet Connection Size | 1/4 in |
| Wire Rope Length | 46 1/2 in |
| Length | 46 1/2 in |
| Fits Chest Size | Low Noise |
| For Media Type | Acetic Acid, Ammonium Hydroxide, Antifreeze, Bleach, Citric Acid, DEF, Ethanol, Ethylene Glycol, Formaldehyde, Glycerin, Isopropanol, Potassium Hydroxide (50%), Sodium Bicarbonate, Sodium Bisulfite, Water |
| Max. Flow Rate | 4 gpm |
| Max. Viscosity | 14,000 cps |
| Diesel Exhaust Fluid Compatible | Yes |
| Wetted Materials | Aluminum, Buna-N, Steel |
| Includes Suction Tube | Yes |
| For Use With | Oils |
| Discharge Tube Outlet ID | 1/2 in |
| Hose Tube Material | Synthetic Rubber |
| Discharge Tube Outlet OD | 1/2 in |
| Self-Priming | Yes |
| Features | Low Noise |
| Includes | 1/4 in Air Filter Regulator, Non-Preset Control Handle |
| Adapter Material | Aluminum |
| Seal Material | Buna-N |
| Discharge Tubing Material | Rubber |
| Delivers | 1001 CPS |
| Suction Tube Material | Steel |
| Adapter Type | Bung |
| Max. Flow GPM | 4 |
| Max. Air Inlet (PSI) | 125 |
| Piston Material | Buna-N |
| Metered | Yes |
| Noise Level | 90 dB |
| Housing Material - Pumps | Aluminum |
| Includes Spout | Yes |
| Housing Finish | Powder Coated |
| Pump Connection ID | 1 in |
| Max. Fluid Temp. | 150 Degrees F |
| Not Recommended Chemicals | See full list of Not Recommended Chemicals Acetic Acid 80%,Acetone,Ammonia Liquid,Anhydrous Ammonia,Automatic Transmission Fluid,Biodiesel,Brake Fluid,Calcium Chloride,Chromic Acid 10%,Chromic Acid 30%,Chromic Acid 5%,Chromic Acid 50%,Concentrated Nitric Acid,Cyclohexane,Diesel Fuel,E85,Ethyl Acetate,Fertilizers,Formic Acid,Fungicides,Gasoline,Glacial Acetic Acid,Heptane,Herbicides,Hexane,Petroleum Oil,Synthetic Oil,Hydrazine,Hydrochloric Acid 100%,Hydrochloric Acid 20%,Hydrochloric Acid 37%,Hydrofluoric Acid 100%,Hydrofluoric Acid 20%,Hydrofluoric Acid 75%,Kerosene,Lacquer Thinners,Lithium Grease,Methanol,Methyl Chloride,Methyl Ethyl Ketone,Motor Oil,Naphtha,Nitric Acid 10% Solution,Nitric Acid 20% Solution,Nitric Acid 50% Solution,Paint,Paint Thinner,Pesticides,Phosphoric Acid 40% Solution,Sodium Bisulfate,Sodium Hydroxide 20%,Sodium Hydroxide 50%,Sodium Hydroxide 80%,Stoddard Solvent,Sulfuric Acid 10% to 75%,Sulfuric Acid 75% to 100%,Sulfuric Acid up to 10%,Toluene,Trichlorethylene 50%,Turpentine,Windshield Washer Fluid,Xylene |
| Pump Connection OD | 1 5/8 in |
| Runs Dry | No |
| Pump Connection Type | FNPT |
| Spout Material | Steel |
| Discharge Connection Type | FNPT |
| Suction Tube OD | 1 5/8 in |
| Includes Discharge Hose | Yes |
| Nozzle Material | Aluminum |
| Duty Cycle | Continuous |
| Variable Speed | No |
| Compatible Chemicals | See full list of Compatible Chemicals Acetic Acid 20%,Ammonium Hydroxide,Antifreeze (Coolant),Citric Acid 50%,DEF,Deionized Water,Ethyl (Ethanol),Ethylene Glycol,Formaldehyde,Formaldehyde 40%,Fresh Water,Glycerin,Isopropyl (Isopropanol),Potassium Hydroxide (50%),Salt Water,Sodium Bicarbonate (10%),Sodium Bisulfite,Sodium Hypochlorite/Bleach (to 20%) |
| Includes Nozzle | Yes |
| Max. Air Pressure | 120 psi |
| Min. Air Pressure | 40 psi |
| Power Source | Air |
| Max. Head Pressure | 600 psi |
| Suction Tube ID | 1 in |
| Nozzle Operation | Manual |
| For Container Type | Drum |
| Food Grade | No |
| Spout Connection Type | FNPT |
| Max. Oil Flow | 4 gpm |
| Includes Bung Adapter | Yes |
| Gear Lube | NT |
| Adapter Connection Type | FNPT |
| Explosion Proof | No |
| Max. Head - Pumps | 1,442 ft |
| Pump Ratio | 5:1 |
| Maximum Fluid Temperature | 150 Degrees F |
| Hazardous Location Class | Not Rated |
| Standards | CE |
| For SAE Viscosity Grade - Maximum | 140 |
| Pressure Ratio | 5:1 |
| Maximum Air Pressure | 120 psi |
| Pump Technology | Piston |
| Maximum Viscosity | 14,000 cps |
| Wetted Material | Aluminum/Buna-N/Steel |
| Chemical Compatibility | Engine Oil, Gear Lube, Hydraulic Oil |
| Maximum Head | 1,442 ft |
| Housing Material | Aluminum/Steel |
| Maximum Head Pressure | 600 psi |
| Air Inlet Connection Type | FNPT |
| Cart Type Included | Cart |
| Maximum Outlet Pressure | 600 psi |
| Maximum Flow Rate | 4 gpm |
| Includes Follower Plate | No Follower Plate Included |
| Container Cover Type Included | No Cover Included |
| Meter Type Included | Digital |
| Hose Cover Material | Synthetic Rubber |
| Air Consumption | 12 cfm |
| Maximum Oil Flow | 4 gpm |
| Static Protection | Not Groundable |
| Minimum Air Pressure | 40 psi |
| Adapter Connection Standard | FNPT |
| Power Source - TS Only | Air |
| Power Source - old | Air |
| Country of Origin | Italy (subject to change) |