McMaster 4262K52 High-Pressure Air-Powered Drum Pump for Oil 6 gpm Flow Rate, for 15 Gallon Container
Transfer lubricating oil such as hydraulic and motor oil with these pumps. They handle nearly twice the amount of pressure as other air-powered drum pumps to move high-viscosity liquids. Install an air line filter/lubricator to ensure efficiency and reduce wear on the pump.
|
Flow Rate
|
6 gpm |
|
For Container Size
|
15 gal. |
|
Maximum Viscosity
|
8,750 cP |
|
Temperature
|
|
|
Minimum
|
10° F |
|
Maximum
|
150° F |
|
Air Pressure
|
0 psi to 150 psi |
|
Air Consumption
|
14 ft³/min |
|
For Drum Opening Size
|
2 NPT |
|
Includes
|
Drum Connector |
|
Air Connection
|
|
|
Port
|
Pipe |
|
Type
|
Threaded |
|
Pipe Size
|
1/4 |
|
Gender
|
Female |
|
Thread Type
|
NPTF |
|
Intake
|
|
|
Tube Adjustability
|
Fixed |
|
Tube OD
|
1 3/4" |
|
Tube Length
|
22" |
|
Tube Material
|
Zinc-Plated Steel |
|
Discharge
|
|
|
Location
|
Pump Body |
|
Connection Port
|
Pipe |
|
Connection
|
Threaded |
|
Pipe Size
|
1/2 |
|
Gender
|
Female |
|
Thread Type
|
NPT |
|
Chemical Resistance
|
|
|
Excellent
|
Hydraulic Oil, Motor Oil |
|
Poor
|
Acetone, Ammonium Hydroxide, Deionized Water, Diesel Fuel, Ethanol, Ethylene Glycol, Gasoline, Hydrochloric Acid (20% Concentration), Hydrochloric Acid (37% Concentration), Hydrochloric Acid (100% Concentration), Isopropyl Alcohol, Kerosene, Lacquer Thinner, Methanol (Methyl Alcohol), Methyl Chloride, Methyl Ethyl Ketone (MEK), Mineral Spirits, Nitric Acid (20% Concentration), Nitric Acid (50% Concentration), Nitric Acid (100% Concentration), Paint, Phosphoric Acid (<40% Concentration), Phosphoric Acid (Greater Than or Equal to 40% Concentration), Salt Water, Sodium Hydroxide (Caustic Soda) (20% Concentration), Sodium Hydroxide (Caustic Soda) (50% Concentration), Sodium Hydroxide (Caustic Soda) (80% Concentration), Sodium Hypochlorite (Bleach) (100% Concentration), Sulfuric Acid (10-75% Concentration), Sulfuric Acid (75-100% Concentration), Sulfuric Acid (<10% Concentration), Water, Xylene |
|
Warning
|
Chemical compatibility must be determined by the customer based on the conditions in which the product is being used, including the presence of other chemicals, temperature, and consistency. |
|
For Use With
|
Hydraulic Oil |
|
Housing Material
|
Steel |
|
Performance
|
High Pressure |
|
Piston Material
|
Steel |
|
Power Source
|
Air |
|
Pump Type
|
Drum |
|
Wetted Parts Material
|
Buna-N, Carbon Steel |
|
Country of Origin
|
India |
|
DFARS Compliance
|
Specialty Metals COTS-Exempt |
|
Export Control Classification Number (ECCN)
|
EAR99 |
|
REACH Compliance
|
REACH (EC 1907/2006) (01/23/2024, 240 SVHC) Compliant |
|
RoHS Compliance
|
RoHS 3 (2015/863/EU) Compliant |
|
Schedule B Number
|
841350.0050 |
|
U.S.–Mexico–Canada Agreement (USMCA) Qualifying
|
No |