PBC Linear VRSD1-036.500 Drilled Linear Rail, V-Guide, Size 1, 36.5 in Length, 0.187 in Width, Stainless Steel
Original price
$84.95
-
Original price
$84.95
Original price
$84.95
$84.95
-
$84.95
Current price
$84.95
Drilled Linear Rail, Overall Length 36.5 in, Overall Width 0.187 in, Overall Height 0.421 in, Rail Material Stainless Steel, Manufacturer Size 1, Number of Mounting Holes 19, Rail Finish Cold Roll, Rail Type Slide, System of Measurement Inch, For Use With V-Guide Wheels and Bushings, Operating Temperature - Maximum 180 Degrees F, Operating Temperature - Minimum 0 Degrees F, Mounting Hole Center to Center 2 in, Mounting Hole Center to Shaft End 1.25 in, Channel Material Stainless Steel
| Type | V-Guide |
|---|---|
| Rail Material | Stainless Steel |
| Manufacturer Size | 1 |
| Overall Length | 36.5 in |
| Overall Width | 0.187 in |
| Overall Height | 0.421 in |
| Thread Size | #6 or M3 |
| Mounting Hole Size | 0.156 in |
| Undercut Depth | 0.127 in |
| Mounting Hole from Shaft End | 0.25 in |
| Temp. Range (F) | 0 - 248 |
| Raceway | 303 Stainless Steel |
| Rail Finish | Cold Roll |
| Number of Rail Holes | 19 |
| Screw Type | Low Profile Socket Head Cap |
| For Use With | V-Guide Wheels and Bushings |
| Number of Mounting Holes | 19 |
| Rail Type | Slide |
| Maximum Operating Temperature | 248 Degrees F |
| Raceway Material | 303 Stainless Steel |
| Minimum Operating Temperature | 0 Degrees F |
| Series | V-Guide |
| Mounting Hole Center to Shaft End | 1.25 in |
| Edge Angle | 90 Degrees |
| Load Direction | Axial, Radial |
| System of Measurement | Inch |
| Requires Lubrication | Lubricant Not Required |
| Channel Material | Stainless Steel |
| Mounting Hole Center to Center | 2 in |
| Country of Origin | United States |