Ingersoll Rand 2925P3TI Impact Wrench Pistol Grip, Std, Full-Size, Industrial Duty, 1 in Square Drive Size

Impact Wrench, Power Source Air Powered, Air Consumption 60 cfm, Air Inlet 3/8 in NPT, Air Pressure 90 psi, Max. Air Pressure 100 psi, Min. Air Pressure 90 psi, Min. Hose Size 1/2 in, Exhaust Location Bottom, Duty Rating Industrial Duty, Breakaway Torque 1,600 ft-lb, Fastening Torque 1,450 ft-lb, Free Speed 5,200 RPM, Impact Rated Yes, Impact Sound Level 96 dB, Impacts per Minute 1,050, Number of Speed Settings Continuous, Power to Weight Ratio 105.2 ft-lb/lb, Max. Bolt Capacity 1 in

Free Speed	5,200 RPM
Air Inlet	3/8 in NPT
Handle Type	Pistol Grip
Anvil	Standard
Duty Cycle - Air Tools	Industrial Duty
Handle Material	Composite
Blows per Minute - Air Tools	1050
Required Pressure	90 PSI
Item - Air Impact Wrenches	Air Impact Wrench
Retainer Type - Air Impacts	Thru Hole
Duty	Industrial
Anvil Type - Air Impacts	Standard
Retainer Type	Through Hole
Average CFM @ 15 Second Run Time	6.00
Features	(4) Position Power Management Dial, Through Handle Exhaust and 360 Degrees Swivel Inlet
Max. Torque	1450 ft.-lb.
Tool Weight	15.2 lb
Body Style - Air Tools	Pistol
Style	Pistol Grip
CFM @ Full Load	60.0
Max. Bolt Capacity	1 in
Torque Range	350 to 1100 ft.-lb.
Housing Material	Composite
Breakaway Torque	1,600 ft-lb
Impact Sound Level	96 dB
Impact Rated	Yes
Built-In Light	No
Fastening Torque	1,450 ft-lb
Min. Air Pressure	90 psi
Clutch Style	Twin Hammer
Max. Air Pressure	100 psi
Impacts per Minute	1,050
Power to Weight Ratio	105.2 ft-lb/lb
Air Pressure	90 psi
Tool Style	Full-Size
Number of Speed Settings	Continuous
Vibration Level	10.5 m/sq sec
Air Consumption	60 cfm
Duty Rating	Industrial Duty
Exhaust Location	Bottom
Drive Type	Standard
Standards	EN ISO 11148-6:2012, EN ISO 15744:2008, EN ISO 28927-2:2009, EN ISO 80079-36:2016, EN ISO 80079-37:2016
Power Source	Air Powered